Dai! Dai! Manca poco allo scadere dell’offerta del 14/02/2018! Original Smok TF-RTA Rebuildable Tank Atomizer a soli 13.18€ con uno sconto del 23%!
La scatola sarà 4.30 x 5.40 x 9.40 cm / 1.69 x 2.13 x 3.7 inches, peserà 0.1760 kg, al suo interno il prodotto è 2.45 x 2.45 x 6.50 cm / 0.96 x 0.96 x 2.56 inches, e pesa 0.0840 kg.
Cosa conterrà quindi il tuo acquisto? 1 x TF-RTA Tank Atomizer, 1 x TF-RTA G4 Deck ( Pre-installed ), 1 x Screwdriver for G4 Deck, 1 x Replacement Glass Tube, 1 x Smok Vape Band, 1 x English User Manual.
ACQUISTA SUBITO
Informazioni Principali
Main
Smok TF-RTA
Material Stainless steel and glass
Capacity 4.5ml
Super big deck-off-base design
No leaking, hidden sealing ring and innovative juice flow control system
Top filling, patented swivel top cap design
Double layer drip tip
Adjustable airflow system, 4 large air slots at the base
Two Editions TF-RTA Available
G2 deck Dual posts velocity style, 16mm big build deck, 0.45ohm ( pre-installed )
G4 deck Authentic quad coil design, 16mm big build deck, 0.14ohm ( pre-installed )
How To Be a Real Beast Tamer
It’s like a beast that you love to hate, so how to tame this ” Beast of Cloud ” ?
With the newest TF-RTA Tank from SMOK, it’s just 3 steps
1. Cut a strip of cotton
2. Build your coils
3. Use your hands and the screwdriver to start with
Super big off-base deck, so easy to build; hidden sealing ring and innovative juice flow control system can significantly solve the leaking problem;
patented swivel-cap design makes top-filling as easy as it gets; and adjustable airflow system with four large air slots at the base, you can control airflow as you like!
Ace, you’ve done it!
Please Note
The G2 deck, heating wire and cotton showed in the pictures is not included in the package.
Off-Base Style, Super Big Deck-Off-Base Design
TF-RTA is different from other rebuildable tank atomizers on the market exclusively applied the super big deck-off-base design.
With 16mm in diameter, the deck space has increased by 30 percent (compared with the TF-RCA deck) and be more convenient to build.
The deck-off-base design makes replacing so easy,and above all else, it’s more economic and cost-effective!
No Leaking
Hidden Sealing Ring and Innovative Juice Flow Control System
For clearomizer or rebuildable atomizer, no leaking is a top-priority task. TF-RTA has more compact body and excellent sealing performanceby using
hidden sealing ring. Along with the innovative juice flow control system, you can close the juice flow slots before filling or replacing deck to prevent leaking.
Patented Swivel Top Cap Design
TFV4 classic swivel-cap design makes top-filling as easy as it gets.
Double-Layered Drip Tip
The drip tip with double-layered structure has been improved on the inner layer of glass to avoid scalding.
Adjustable Airflow System
With four large air slots at the base, you can control airflow as you like!
How To Build The RTA ( G4 )
1. Before starting make sure your hands are clean.
2. Taking the TF-RTA G4 deck apart.
3. Installing the pre-wrapped coil. Insert one end of your coil into the up-side screw, and the other end into the down-side screw.
4. Positioning and cutting the exceeding ends of wire off. Make sure the coil is fixed and lined up with the air hole,
and also make sure the coil is NOT touching the deck. Then cut the exceeding ends of wire off.
5. Cutting a strip of cotton and make sure it’s just larger than the coil you built.
6. Inserting the cotton, and placing it in the middle.
7. Cutting the wick at an angle and make sure it’s not too short and not too long.
8. Wet the coil with your e-liquid and adjust the wick.
Warning Coils must be checked for resistance before they are fired on a device, and re-checked periodically to ensure the resistance remains the same.
How To Build The RTA ( G2 )
1. Before starting make sure your hands are clean.
2. Taking the TF-RTA G2 deck apart.
3. Installing the pre-wrapped coil. Insert one end of your coil into the left-side holes, and the other end into the right-side holes.
4. Positioning and cutting the exceeding ends of wire off. Make sure the coil is fixed and lined up with the air hole,
and also make sure the coil is NOT touching the deck. Then cut the exceeding ends of wire off.
5. Cutting a strip of cotton and make sure it’s just larger than the coil you built.
6. Inserting the cotton, and placing it in the middle.
7. Cutting the wick at an angle and make sure it’s not too short and not too long.
8. Wet the coil with your e-liquid and adjust the wick.
Warning Coils must be checked for resistance before they are fired on a device, and re-checked periodically to ensure the resistance remains the same.
Link all’acquisto
Se volete acquistare il prodotto, o avere anche solo maggiori informazioni, basta cliccare il pulsante sottostante.
Galleria
[mc4wp_form id=”30829″]
Supporto
Hai bisogno di aiuto? Iscriviti sul nostro forum per il supporto tecnico! Vuoi tenerti aggiornato? Allora seguici sui nostri social Facebook e Twitter!
